TM10-3930-641-34-2
HYDRAULIC PUMP ASSEMBLY/DISASSEMBLY (CONT)
(Sheet 2 of 7)
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY
NOTE
Clean outside of pump before disassembly.
1.
Eight nuts (1)
Remove four (2), loosen four (1).
2.
Pump
Place on end opposite the drive shaft.
3.
Four Nuts (1)
Remove.
4.
Casting (3)
Remove.
5.
O-ring seal (6)
Remove from casting.
6.
Two lip seals (15) and
Remove from casting.
spacer ring (16)
7.
Ring retainer (8)
Remove.
8.
Back-up ring (7)
Remove.
9.
Packing (9)
Remove.
10. Isolation plate (6)
Remove.
Go on to Sheet 3
7-14