TM 10-3930-641-34-2
CARRIAGE ASSEMBLY DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 7 of 7)
LOCATION/ITEM
ACTION
REMARKS
13.
Side roller assemblies (27)
a. Install without shims on inner mast.
b.
Measure distance (B) between outside
surface of each pair of side rollers.
c.
Subtract distance B from A.
14.
Shims (39)
Add under each pair of roller assemblies until
B minus A is between .010 to .059 in. (0.25
to 1.50 mm).
NOTE
Divide shims so that an equal thickness is
installed on each side of carriage.
TA099190
End
7-100