TM 10-3930-641-34-2
SIDE SHIFT/TILT CYLINDERS DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 3 of 3)
LOCATION/ITEM
ACTION
REMARKS
4.
Pins (6)
Remove.
NOTE
INSTALLATION
The rod end of the shift cylinder attaches to
the fork assembly. The barrel end attaches to
the carriage tilt assembly.
1.
Side shift cylinder (1)
a. Fasten to hoist.
b.
Put in position.
2.
Two hydraulic lines (2)
Remove caps and connect.
3.
Pins (6)
Install.
4.
Capscrews (3), washers (4),
Install.
retainers (5)
End
7-106