TM 10-3930-641-34-2
CAB HEATER DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 6 of 9)
LOCATION/ITEM
ACTION
REMARKS
12.
Channel (53)
a. Remove from housing.
b. Check for cracks, dents, distortion.
c.
Replace as needed.
13. Set screw
Remove from fan (52).
14.
Fan (52)
a
Remove from motor shaft.
b. Check for cracks, dents, distortion.
c.
Replace as needed.
15.
Two nuts and washers
Remove from motor screw posts.
16.
Motor (51)
a. Remove from housing.
b. Check shaft for smooth turning action
with hand.
c.
Check motor for cracks, dents, nicks or
burs on shaft, distortion, etc.
ohm meter. Connect meter probes to
the two motor lead wires. Meter should
e. Replace as needed.
Go on to Sheet 7
8-24