TM 10-3930-641-34-2
FORCE LIMITER DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 3 of 3)
LOCATION/ITEM
ACTION
REMARKS
2.
Clevis (11)
a. Place one spacer (9) onto clevis rod.
b. Install clevis (11) into spring mount (8).
c.
Place one washer (6), four springs (7)
and other washer (6) onto clevis rod.
3.
Rod holder (12)
a.
Place other spacer (9) and rod holder
(12) onto clevis rod.
b. Secure with nuts (13) and (14).
NOTE
Tighten nut (13) just enough to remove all
lengthwise slack in the assembly, grease
guide rods (2) and sliding parts for 6 inches of
travel on either side of rod guides.
TA172237
End
9-23