TM 10-3930-641-34-2
TWISTLOCK ADJUSTMENT (CONT)
(Sheet 2 of 2)
LOCATION/ITEM
ACTION
REMARKS
Adjust bayonet (33)
a. Remove cotter pin (19).
b. Adjust nut (18) to achieve 4-1/8"
(101.7 mm) to 4-5/8" (102.2 mm) at "A."
c.
Align nearest slot in nut (18) with hole in
bayonet (33).
d. Install new cotter pin (19).
NOTE
Always use a new cotter pin when replacing.
For best operation all four bayonets on top
handler should be adjusted to the same
dimension at "A."
TA172238
End
9-25 / (9-26 Blank)