OPERATION UNDER USUAL CONDITIONS - CONTINUED
PARKING AND POSITIONING FOR SHORT- AND LONG-TERM STORAGE - CONTINUED
Operational Mode with Tophandler Turned Longitudinal to RTCH.
a. Center tophandler by lining up white lines in middle.
b. Extend boom to 71 in. (180 cm) on extension screen and rotate tophandler clockwise to longitudinal position. Lower
boom to lowest position and retract until tophandler is close to front tires.
Cab and Boom in Transport Position with Tophandler Turned Perpendicular to RTCH.
a. Place cab in transport position (WP 0007 00).
b. Place boom support in transport position (WP 0007 00).
DO NOT place shoring next to twistlock pins where they will hit sensor plungers.
c. Extend boom to 6 in. (15 cm) on extension screen and lower boom slowly to ground level. Place shoring under each
corner of tophandler to prevent twistlocks from contacting ground.