PREPARATION FOR TRANSPORT - CONTINUED
PLACING CAB IN TRANSPORT POSITION - CONTINUED
h. Pull cab side movement lever until cab has moved all the way to the left and safety locks drop into place on cab track.
i. Slowly push cab lift/lower lever and lower cab to transport height.
j. Push cab side movement lever to gently move cab slightly to the right, so that cab securing pins can be installed.
Close and latch door of remote hydraulic control compartment.
LOCKING PINS LEVER
CAB SIDE MOVEMENT
Pins should be installed from the rear. Install rearmost pin first.
k. Install two pins and retaining pins to secure cab in transport position.
CAB IN TRANSPORT POSITION