TM 10-3930-675-10-1
PREPARATION FOR TRANSPORT - CONTINUED
0007 00
PLACING BOOM SUPPORT IN TRANSPORT POSITION - CONTINUED
b. Run RTCH engine at idle.
c. Open door of remote hydraulic control compartment.
CAUTION
DO NOT operate locking pin lever and folding boom support lever at the same time. If levers are
operated at the same time, boom support locking pin extensions may shear.
NOTE
If the hydraulic function for boom support locking pins, boom folding, or bogie wheel lowering
are not working, it may be necessary to reposition cab closer to the frame.
Pull folding boom suspension handle to ensure boom support is in fully raised position.
Left and right boom support locking pins may not retract at the same time. Keep pushing locking
pin lever until they both retract.
d. Push locking pin lever to retract boom support locking pins.
CAUTION
Ensure locking pins are fully retracted to avoid damaging them.
e. Visually inspect both sides to ensure left and right boom support locking pins have retracted.
LOCKING PINS LEVER
CAB SIDE MOVEMENT
LEVER
FOLDING BOOM
SUPPORT LEVER
CAB
LIFT/LOWER
LEVER
BOGIE WHEEL
PRESSURE VALVE
BOGIE WHEELS
LEVER
434-10007
0007 00-7