OPERATION UNDER USUAL CONDITIONS - CONTINUED
PARKING AND POSITIONING FOR SHORT- AND LONG-TERM STORAGE
The following instructions allow the RTCH-RT 240V2 to be parked or stored in a minimal amount of space and prevent
damage to machine. The RTCH-RT 240V2 can be stored in four different modes.
Operational Mode with Tophandler Stowed in Normal Operating Position (Perpendicular to RTCH).
Lower boom to lowest position and fully retract boom.
Operational Mode with Tophandler Turned Longitudinal to RTCH.
a. Center tophandler by lining up white lines in middle.
b. Extend boom to 71 in. (180 cm) on extension screen and rotate tophandler clockwise to longitudinal position. Lower
boom to lowest position and retract until tophandler is close to front tires.
Cab and Boom in Transport Position with Tophandler Turned Perpendicular to RTCH.
a. Place cab in transport position (WP 0007 00).
b. Place boom support in transport position (WP 0007 00).