TM 10-3930-675-10-2
PREPARATION FOR TRANSPORT - CONTINUED
0007 00
PLACING CAB IN TRANSPORT POSITION - CONTINUED
d. Remove two retaining pins and remove handrail.
NOTE
The auxiliary pump runs for approximately four minutes. If the pump shuts off, it may be necessary
to push auxiliary pump switch on instrument panel inside cab to restart auxiliary pump.
e. Push auxiliary pump switch on instrument panel inside cab to start auxiliary pump.
f. Open door of remote hydraulic control compartment.
g. Pull cab lift/lower lever to raise cab transport lift until cab track is level with current cab position.
HANDRAIL
CAB
TRANSPORT
SAFETY
LIFT
LOCKS
CAB
TRACK
RETAINING
PIN
h. Pull cab side movement lever until cab has moved all the way to the left and safety locks drop into place on cab track.
i. Slowly push cab lift/lower lever and lower cab to transport height.
j. Push cab side movement lever to gently move cab slightly to the right, so that cab securing pins can be installed.
Close and latch door of remote hydraulic control compartment.
LOCKING PINS LEVER
CAB SIDE MOVEMENT
LEVER
FOLDING BOOM
SUPPORT LEVER
CAB
LIFT/LOWER
LEVER
BOGIE WHEEL
PRESSURE VALVE
BOGIE WHEELS
LEVER
374M-0011
0007 00-4