TM 10-3930-675-10-2
ERROR CODES - CONTINUED
0020 00
Table 4. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Stop Vehicle
Stop Vehicle Immediately
782
Transmission ECU shifts to
Abort mission.
neutral.
Slippage at clutch KR - transmis-
Notify maintenance.
Limp home.
sion ECU calculates a differential
If there is also a failure at
speed at closed clutch KR. If this
another clutch, ECU shifts to
calculated value is outside of
neutral.
range, ECU interprets this as a
ECU will shut down.
slipping clutch.
Reduced power and engine
speed.
Sensor defective.
Incorrect sensor gap size.
Clutch defective.
Stop Vehicle
Warning - Degraded
None.
Operation
783
Check oil level.
Allow transmission
Overheated sump - transmission
to cool down.
ECU measured temperature in oil
Press RESET.
sump that is over 212F (100C).
If error shows again,
Low oil level.
notify maintenance.
Temperature sensor defective.
Finish mission.
Finish Mission
Information/Maintenance
None.
786
Notify maintenance.
Oil filter differential pressure -
transmission ECU measured a
voltage at differential pressure
switch outside allowable range.
Oil filter polluted.
Cable/connector defective.
Differential switch defective.
Stop Vehicle
Warning - Degraded
None.
Operation
795
Check oil level.
Allow transmission
Overheated converter output -
to cool down.
ECU measured oil temperature at
Press RESET.
converter output that is over
If error shows again,
248F (120C).
notify maintenance.
Low oil level.
Finish mission.
Temperature sensor defective.
Stop Vehicle
Stop Vehicle Immediately
Transmission ECU shifts to
811
Abort mission.
neutral.
Low power at battery - measured
Notify maintenance.
ECU will shut down.
voltage at power supply is lower
Reduced power and engine
than 18V.
speed.
Cable defective.
Battery defective.
Connector defective.
0020 00-34