TM 10-3930-675-20-1
0008 00-14
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0008 00
Table 2. Error Code 1132 - Throttle Position Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1132 - Throttle Position Sensor
Circuit Failure - Continued
11.Place ignition switch to OFF
position
and
disconnect
harness from throttle position
sensor and disconnect harness
connector from engine ECU.
12.Measure resistance from pin
48 of harness connector to all
other pins in connector.
Resistance should be greater
than 100k ohms.
If harness requires replacement,
notify SRA.
>100K OHMS
USE TEST LEAD
KIT P/N 3822758