TM 10-3930-675-20-1
0017 00-18
ENGINE ELECTRONIC CONTROL UNIT (ECU) TROUBLESHOOTING - CONTINUED
0017 00
Table 5. Error Code 1352 - Sensor Voltage Supply Failure Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1352 - Sensor Voltage Supply Failure
1. Disconnect sensor harness
from
intake
manifold
pressure sensor and place
ignition
switch
in
ON
position.
2. Measure voltage from intake
manifold pressure connector
pin A to pin B. Voltage should
be less than 4.5V.
If voltage is not as specified,
replace intake manifold pressure
sensor (WP 0093 00).
<4.5V