TM 10-3930-675-20-1
0019 00-10
ENGINE OIL PRESSURE SENSOR TROUBLESHOOTING - CONTINUED
0019 00
Table 2. Error Code 1141 - Oil Pressure Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1141 - Oil Pressure Sensor Circuit
Failure - Continued
9. Measure resistance from pin
44 (or pressure signal) of
sensor harness connector to
chassis ground. Resistance
should be greater than 100k
ohms.
If resistance is not as specified,
notify SRA to replace engine
harness.
10.Ensure that ignition switch is
in OFF position. Disconnect
engine harness from oil
pressure/temperature sensor
and disconnect sensor harness
from engine ECU.
11.Measure resistance from pin
44 (or pressure signal) of
sensor harness connector to
all other pins in connector.
Resistance should be greater
than 100k ohms.
a. If resistance is as specified,
replace
oil
pressure/
temperature sensor (WP 0093
00).
b. If resistance is not as
specified, notify SRA to
replace engine harness.
>100K OHMS
USE TEST LEAD KIT P/N 3822758