TM 10-3930-675-20-1
0023 00-11
ENGINE FUEL PRESSURE SENSORS AND CIRCUITS TROUBLESHOOTING - CONTINUED
0023 00
Table 3. Error Code 1582 - Fuel Inlet Restriction Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1582 - Fuel Inlet Restriction Sensor
Circuit Failure - Continued
5. Install breakout cable P/N
3824776 between sensor and
harness
connector.
Place
ignition
swtich
in
ON
position.
6. Measure signal voltage at pin
3 or C and pin 2 or B. Voltage
should be 0.5-4.16V.
a. If voltage is as specified,
repair or replace connectors
(WP 0111 00).
b. If engine harness requires
replacement, notify SRA.
c. If voltage is not as specified,
replace engine ECU (WP
0078 00).
4.75-5.25V
0.5-4.16V