TM 10-3930-675-20-1
0025 00-14
ENGINE BATTERY VOLTAGE CIRCUITS TROUBLESHOOTING - CONTINUED
0025 00
Table 4. Error Code 1474 - Starter Solenoid Lockout Relay Driver Circuit Failure
Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1474 - Starter Solenoid Lockout
Relay Driver Circuit Failure - Continued
7. Measure resistance from
actuator harness connector
pin 46 to all other pins in
connector. Resistance should
be greater than 100k ohms.
If resistance is not as specified,
notify SRA to repair or replace
engine harness.
8. Place ignition switch in OFF
position, disconnect actuator
harness
from
31-pin
connector, and disconnect
actuator harness connector
from engine ECU (794).
Measure resistance from
actuator harness connector
pin 46 to engine block
ground. Resistance should be
greater than 100k ohms
If resistance is not as specified,
notify SRA to repair or replace
engine harness.
>100K OHMS
USE TEST LEAD
KIT P/N 3822758