TM 10-3930-675-20-2
0067 00-4
WATER PUMP REPLACEMENT - CONTINUED
0067 00
INSTALLATION - CONTINUED
NOTE
Oil seal must be installed with lip of seal and shaft clean and dry. Yellow lip of seal must face out.
6.
Install new gasket (5) and new oil seal (6).
NOTE
To prevent oil leakage, use sealant on clamping ring mounting screws.
7.
Install clamping ring (7) and secure in place with five screws (8). Tighten screws to 60 lb-in (7 Nm). Repeat tightening
screws to 180 lb-in (20 Nm).
8.
Apply a light coat of oil to inside of new dust seal (4) and install dust seal.
9.
Using pusher adapter and pulley pusher, install water pump pulley (3).
10.
Install water pump pulley retaining screw (1). Tighten screw to 55 lb-ft (75 Nm).
4
5
6
7
8
8
3
1