TM 10-3930-675-20-2
0072 00-5
INSTRUMENT PANEL SWITCHES, GAGES, AND PANEL LAMPS
REPLACEMENT - CONTINUED
0072 00
ROTARY SWITCH INSTALLATION - CONTINUED
3.
Connect instrument panel wiring harness connector(s) (14) to rear of switch (7).
4.
Push switch (7) upward thru hole in switch plate (10) and install nut (12).
5.
Press knob (11) onto shaft of switch (7) and tighten setscrew (13).
6.
Install switch plate (10) to instrument panel (2) with three screws (6).
7.
Install instrument panel (2) with six washers (9) and screws (8).
8.
Install switch/gage panel (1) to instrument panel (2) with ten screws (3).
6
2
7
8,9
10
1
2
3