TM 10-3930-675-20-2
0074 00-7
TOPHANDLER PROXIMITY SWITCHES REPLACEMENT - CONTINUED
0074 00
SPREADER BEAM PROXIMITY SWITCH REMOVAL - CONTINUED
5.
Loosen cable nut (27) and slide cable nut and grommet (26) back on proximity switch (17) cable.
CAUTION
To avoid damage to junction box, a fine-tipped jewelers screwdriver should be used when disconnecting
proximity switch wires. DO NOT use a punch.
NOTE
Tag wires for installation.
6.
Using a jewelers screwdriver, disconnect proximity switch wires (25) from terminal blocks (24).
NOTE
Remove tiedown straps as needed. Discard tiedown straps.
7.
Remove proximity switch (17) with cable from tophandler.
8.
Remove cable cover (28) from proximity switch (17) cable.
23
24
25
26
27
28
17