TM 10-3930-675-20-2
0076 00-3
TOPHANDLER JUNCTION BOX MAINTENANCE - CONTINUED
0076 00
RELAY REMOVAL
NOTE
All five relays are removed the same.
1.
Loosen six screws (1) and remove cover (2) of tophandler junction box (4). Note that three circuit breakers (5) should be
in ON position.
2.
Inspect rubber seal (3) of cover (2). Remove and discard only if damaged.
3.
Remove relay (11) from relay holder (12).
RELAY INSTALLATION
NOTE
All five relays are installed the same.
1.
Install relay (11) in relay holder (12).
2.
If removed, install new rubber seal (3) to cover (2).
3.
Install cover (2) on tophandler junction box (4) and tighten six screws (1).
END OF WORK PACKAGE
1
2
4
5
11
12
11
12