TM 10-3930-675-20-2
0098 00-3
BOOM ANGLE SENSOR REPLACEMENT - CONTINUED
0098 00
REMOVAL - CONTINUED
INSTALLATION
1.
Position boom angle sensor (4) with cable (14) to vehicle.
2.
Using a jewelers screwdriver, connect three wires of cable (14) to terminal blocks (13) of junction box (12).
3.
Install bushing (17), grommet (16), and cable nut (15) to junction box (12).
4.
Install cover (10) on junction box (12) and tighten four screws (11).
13
12
14
15
16
17