TM 10-3930-675-20-2
0111 00-9
ELECTRICAL GENERAL MAINTENANCE INSTRUCTIONS - CONTINUED
0111 00
MULTIMETER USAGE - CONTINUED
CAUTION
Before performing a continuity test, always turn master battery switch to OFF position and disconnect cir-
cuit to be tested. Failure to follow this caution may damage multimeter.
b.
Testing for Continuity.
(1)
Zero multimeter.
(2)
Connect black and red probes (49 and 50) to both terminals to circuit being tested.
(3)
Read digital readout (42) and interpret results as follows:
(a) If digital readout indicates 0 (zero), circuit has continuity.
(b) If digital readout indicates resistance, circuit is open.
TESTING AN ELECTRICAL CABLE
TESTING A BULB
TESTING A SWITCH