TRANSMISSION OIL, OIL FILTERS, AND OIL FILTER HEAD
REPLACEMENT - CONTINUED
TRANSMISSION OIL FILTERS REMOVAL - CONTINUED
Use a strap wrench to loosen oil filter (4).
Unscrew oil filter (4) from oil filter head (3) by hand. Discard filter.
Perform steps 1 and 2 for second oil filter (4).
TRANSMISSION OIL FILTERS INSTALLATION
Ensure oil filter head is clean and free of old oil.
Apply a thin coat of lubricating oil to filter seal.
Fill new oil filter (4) with clean lubricating oil.
DO NOT overtighten oil filter. Overtightening filter may cause damage to filter or filter head which will
result in oil leaks.
Install oil filter (4) on oil filter head (3) and hand tighten.
Use strap wrench to tighten oil filter (4) an additional ½ to ¾ turn.
Perform steps 1 thru 4 for second oil filter (4).
Start engine (TM 10-3930-675-10) and check for leaks.
Check transmission oil level and add oil as needed (LO 10-3930-675-12).