TM 10-3930-675-20-2
0131 00-2
STEERING COLUMN REPLACEMENT - CONTINUED
0131 00
REMOVAL - CONTINUED
NOTE
Perform steps 2 and 3 at rear of top plastic housing.
2.
Disconnect eight connectors (6) from five switches (4).
NOTE
Remove and discard tiedown straps as necessary.
3.
Pull each of eight connectors (6) down thru bottom plastic housing (5), rubber bellows (7), and away from steering col-
umn (2).
NOTE
Perform steps 4 thru 7 at front of top plastic housing.
4.
At top plastic housing (16) of steering column, disconnect four connectors (9) of steering column wiring harness (17)
from rear of ignition switch (8).
5.
Disconnect connector (18) of steering column wiring harness (17) from connector (19) of warning buzzer (10).
6.
Remove two screws (13) and remove test connector (12).
7.
Disconnect ground connector (15) and connector (14) of steering column wiring harness (17) from rear of ECS display
screen (11).
4
2
4
5
6
7