CAB AIR FILTERS REPLACEMENT - CONTINUED
CAB SIDE AIR FILTER REMOVAL - CONTINUED
Remove filter element (5) from cab heater/AC housing (4).
Using rags, wipe interior of cab heater/AC housing (4) free of dust and dirt.
CAB SIDE AIR FILTER CLEANING AND INSPECTION
Compressed air used for cleaning or drying purposes, or for cleaning restrictions, should never exceed 30 psi
(207 kPa). Use protective equipment and exercise caution to avoid injury to personnel.
Use compressed air to clean dirt and debris from air filter.
As required, a solution of detergent and water may be used to clean air filter. Dry thoroughly with compressed air.
Inspect air filter for damage. Replace if damaged.
CAB SIDE AIR FILTER INSTALLATION
Install filter element (5) to cab heater/AC housing (4).
Use care when installing grille to prevent damaging rubber seal.