TM 10-3930-675-24-1
ERROR CODES - CONTINUED
0005 00
Table 1. Error Codes - Continued.
ERROR
DISPLAY
ERROR CODE CATEGORY/
CODE
LAYOUT
DRIVER ACTION
EXPLANATION
VEHICLE LIMITATIONS
Stop Vehicle
Stop Vehicle Immediately
Brakes may overheat at rear
192
Abort mission.
axle.
Temperature in rear wheel end
Notify maintenance.
above 203F (95C)
Cable defective.
No cooling.
Stop Vehicle
Stop Vehicle Immediately
Tophandler not working.
201
Put load down safely.
Supply voltage, ECU 791
Abort mission.
Emergency stop engaged.
Notify maintenance.
Circuit breaker tripped.
Cable defective.
Stop Vehicle
Stop Vehicle Immediately
Operating system and
tophandler not working.
202
Put load down safely.
Supply voltage, CAN 791
Abort mission.
Circuit breaker tripped.
Notify maintenance.
Cable defective.
Stop Vehicle
Stop Vehicle Immediately
Operating system not
working.
203
Put load down safely.
Ref. voltages 10V- 791
Abort mission.
Circuit breaker tripped.
Notify maintenance.
Cable defective.
Stop Vehicle
Stop Vehicle Immediately
None if code clears.
Operating system and
205
Shut engine OFF/ON.
Memory fault - check ECU 791
tophandler not working.
If code clears, resume
Circuit breaker tripped.
mission.
Cable defective.
If code remains,
notify maintenance.
Stop Vehicle
Stop Vehicle Immediately
Generate error code 130.
210
Press RESET.
Tilt angle sensor, signal out of
Put load down safely.
range
Abort mission.
Potentiometer damaged.
Notify maintenance.
Cable defective.
Short circuit.
Stop Vehicle
Stop Vehicle Immediately
Both locked and unlocked
twistlock at the same time.
212
Abort mission.
Logical error - left twistlock
Safe operation is not possible.
Notify maintenance.
Short circuit.
Signal from both 7204L and 7205L.
0005 00-8