TM 10-3930-675-24-1
ERROR CODES - CONTINUED
0005 00
Table 1. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Stop Vehicle
Stop Vehicle Immediately
Stop vehicle by switching to
Abort mission.
neutral.
Deviation between two potentiom-
Notify maintenance.
Steering system will operate
eter tracks, but both inside toler-
but is not redundant.
ance range
Wheel 1.
313
Wheel 2.
314
Wheel 3.
315
Wheel 4.
316
Stop Vehicle
Stop Vehicle Immediately
Stop vehicle by switching to
neutral.
Check wheel for
Steering deviation between set
blockage.
point and actual value (tracking
Steering remains active and
If blocked, remove
error)
tries to close up to set point.
blockage and press
RESET.
System will be active as soon
If not blocked, notify
as deviating wheel has closed
maintenance.
up.
Wheel 1.
317
Wheel 2.
318
Wheel 3.
319
Wheel 4.
320
Stop Vehicle
Stop Vehicle Immediately
This error prohibits driving
after steering calibration if
Notify maintenance.
Wheel alignment values out of
range
Wheel 1.
range.
321
Wheel 2.
322
Wheel 3.
323
Wheel 4.
324
Stop Vehicle
Stop Vehicle Immediately
Stop vehicle by switching to
neutral.
Notify maintenance.
Break in cable to proportional
valve
Steering computer cannot
Wheel 1.
control wheel with broken
325
Wheel 2.
cable.
326
Wheel 3.
Faulty wheel has to be aligned
327
Wheel 4.
by manual operation of valve.
328
0005 00-14