TM 10-3930-675-24-1
ERROR CODES - CONTINUED
0005 00
Table 1. Error Codes - Continued.
ERROR
DISPLAY
CODE
LAYOUT
DRIVER ACTION
ERROR CODE EXPLANATION
VEHICLE LIMITATIONS
Press RESET
Warning - Degraded
Gearshift quality is reduced
Operation
due to another control mode.
652
Finish mission.
(Operating mode: substitute
Notify maintenance.
Short circuit to battery voltage or
clutch control).
open circuit at turbine speed
input, transmission ECU mea-
If there is also a failure at
sures a voltage higher than 7.0V
output speed, transmission
at speed input pin
ECU shifts to neutral.
Cables defective.
Limp home.
Sensor defective.
Incorrect sensor gap size.
Press RESET
Warning - Degraded
Gearshift quality is reduced
Operation
653
Finish mission.
due to another control mode.
Notify maintenance.
(Operating mode: substitute
Short circuit to ground at turbine
clutch control).
speed input, transmission ECU
measures a voltage less than
If there is also a failure at
0.45V at speed input pin
output speed, transmission
Cables defective.
ECU shifts to neutral.
Sensor defective.
Limp home.
Press RESET
Warning - Degraded
Gearshift quality is reduced
Operation
due to another control mode.
654
Finish mission.
(Operating mode: substitute
Notify maintenance.
Logical error at turbine speed
clutch control).
input, transmission ECU mea-
sures turbine speed over a thresh-
If there is also a failure at
old and at the next moment the
output speed, transmission
measured speed is zero
ECU shifts to neutral.
Cables defective.
Sensor defective.
Limp home.
Incorrect sensor gap size.
Finish Mission
Information/Maintenance
Gearshift quality is reduced
due to another control mode.
655
Notify maintenance.
Short circuit to battery voltage or
(Operating mode: substitute
open circuit at internal speed
clutch control).
input, transmission ECU mea-
sures a voltage higher than 7.0V
at speed input pin
Cables defective.
Sensor defective.
0005 00-24