TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED
Table 1. Engine Troubleshooting Procedures (Non-Error Code) - Continued.
TEST OR INSPECTION
1. Engine Will Not Crank - Continued.
10.Check wiring. Remove wire a. Should have continuity to
172 from the "I" terminal on
continuity to ground on the
alternator "I" terminal (WP
b. If no continuity to ground,
touch wire 172 that was
removed to ground and try
cranking the engine.
c. If engine cranks, replace the
d. If engine does not crank, check
e. Repair or replace damaged
wires or connectors (WP 0113