TM 10-3930-675-24-1
TROUBLESHOOTING PROCEDURES (NON-ERROR CODE) - CONTINUED
0007 00
Table 1. Engine Troubleshooting Procedures (Non-Error Code) - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b. Tighten or repair fuel lines,
hoses, and fittings (WP 0060
00).
c. Replace clogged fuel/water
separator (WP 0059 00).
d. Check quality of fuel, type, and
grade.
5. Check
for
turbocharger Replace turbocharger (WP 0217
malfunction.
00).
6. Engine Deceleration - Poor.
1. Check for restricted or sticking a. Remove obstructions from
accelerator pedal. Check
accelerator pedal.
operation of throttle position
sensor.
b. Test throttle position sensor by
performing
the
troubleshooting steps for error
2. Check for leaking fuel lines, Tighten or repair fuel lines, hoses,
hoses, and fittings that may and fittings (WP 0060 00).
allow air into the fuel system.
3. Check for any restrictions in a. Remove any fuel line
fuel lines, hoses, and fittings.
restriction (WP 0060 00).
b. Replace any damaged or
restricted fuel line, hose, or
fitting (WP 0060 00).
4. Check
for
turbocharger Replace turbocharger (WP 0217
malfunction.
00).
7. Engine Performance (Power) - Low.
1. Check for any error codes or Correct error code(s)/condition.
conditions that de-rate engine
RPM.
2. Check for parasitic loads on Check for brakes dragging,
engine.
hydraulic malfunctions, etc.
3. Check engine oil level.
Verify engine oil is not overfilled
0007 00-8