ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
Table 2. Error Code 1132 - Low Voltage Detected at Throttle Position
Sensor Circuit Troubleshooting Procedures - Continued.
TEST OR INSPECTION
Error Code 1132 - Low Voltage Detected at 11.Check
Throttle Position Sensor Circuit - Continued.
Disconnect the OEM harness
47 or 48 and any other pin in the
connector and connector X16.
OEM harness connector, replace
the engine and transmission
wiring harness (WP 0113 00).
between pin 47 and all of the
other pins in the connector and
between pin 48 and all of the
other pins in the connector.
There should be continuity