ENGINE TEMPERATURE SENSORS AND CIRCUITS TROUBLESHOOTING - CONTINUED
Table 8. Error Code 1213 - Oil Temperature
Sensor Circuit Failure Troubleshooting Procedures - Continued.
TEST OR INSPECTION
Error Code 1213 - Oil Temperature Sensor 4. Place ignition switch in OFF
Circuit Failure - Continued.
position and disconnect engine
harness from oil pressure/
5. Measure resistance from pin 4 If resistance is not as specified,
(or D) of oil pressure/ replace oil pressure/temperature
temperature sensor to engine sensor (WP 0094 00).
should be greater than 100k
USE TEST LEAD KIT P/N 3822917
6. Place ignition switch in OFF If engine harness requires
position. Disconnect engine replacement, notify Sustainment
harness from oil pressure/ Maintenance.
disconnect sensor harness
connector from engine ECU.