ENGINE BATTERY VOLTAGE CIRCUITS TROUBLESHOOTING - CONTINUED
Table 4. Error Code 1474 - Starter Solenoid Lockout
Relay Driver Circuit Failure Troubleshooting Procedures - Continued.
TEST OR INSPECTION
If continuity is not found or
Driver Circuit Failure - Continued.
continuity to ground between
continuity to ground is found,
the mounted part 31 pin OEM
notify Sustainment Maintenance
harness connector pin 20 and
to replace engine harness.
the actuator harness connector
10.Check continuity. Disconnect
If a short (continuity) is found
the 31 pin harness connector,
between any of the pins, notify
actuator harness connector and
Sustainment Maintenance to
sensor harness connector.
replace engine harness.
pin 20 and all of the other pins
in the 31 pin OEM harness
USE TEST LEAD KIT P/N 3822758