TM 10-3930-675-24-1
STEERING SENSOR TROUBLESHOOTING - CONTINUED
0035 00
Table 10. Error Code 310 -
Right-Rear Wheel
Sensor Circuit Failure Troubleshooting Procedures -
Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 310 - Right-Rear Wheel Sensor 3. Disconnect wires 1, 2, and 3
If resistance is not as specified,
Circuit Failure - Continued.
from X192 pins 1, 2, and 3 (WP
replace right-rear wheel sensor
0048 00-21). Check resistance
(WP 0104 00). Reconnect wheel
between wires 1 and 3.
sensor wires 1, 2, and 3 after
Resistance should be around
checking.
2k Ohms. Check resistance
between wires 1 and 2.
Resistance should be 2k to 4k
Ohms.
4. Disconnect wires 4, 5, and YE/
If resistance is not as specified,
GN from X192 pins 4, 5, and 6
replace right-rear wheel sensor
(WP 0104 00). Reconnect wheel
sensor wires 4, 5, and YE/GN
YE/GN. Resistance should be
after checking.
around 2k Ohms. Check
5. Resistance should be 2k to
4k Ohms.
5. Inspect X192 wiring and a. If continuity is not found at
terminals for damage. Inspect
any
one
wire,
notify
connector X170 for damage.
Sustainment Maintenance to
Check resistance of wires GY,
replace X170 to X192 harness.
BK, and RD between X192 b. Repair or replace damaged
pins 1, 2, and 3 and X170 pins
connectors (WP 0113 00).
YE, and GN between X192
any
one
wire,
notify
pins 4, 5, and 6 X170 pins 4, 5,
Sustainment Maintenance to
replace X170 to X192 harness.
b. Repair or replace damaged
connectors (WP 0113 00).
7. Inspect ECU (792) pins 36, 87, a. Replace damaged ECU (792)
and, 92 for connection or
terminal board (WP 0080 00).
damage. Check continuity of b. Repair or replace damaged
wires A1701, A1702, and
wires or connectors (WP 0113
00).
8. Inspect ECU (792) pins 32, 93, a. Replace damaged ECU (792)
and 139 for connection or
terminal board (WP 0080 00).
damage. Check continuity of b. Repair or replace damaged
wires A1704, A1705, and
wires or connectors (WP 0113
00).
c. Replace right-rear wheel
sensor (WP 0104 00).
0035 00-12