TM 10-3930-675-24-2
WATER PUMP REPLACEMENT - CONTINUED
0068 00
INSTALLATION - CONTINUED
NOTE
To prevent oil leakage, use sealant on clamping ring mounting screws.
7.
Install clamping ring (7) and secure in place with five screws (8). Tighten screws to 60 lb-in. (7 Nm). Repeat tightening
screws to 180 lb-in. (20 Nm).
8.
Apply a light coat of oil to inside of new dust seal (4) and install dust seal.
5
4
6
8
7
8
9.
Using pusher adapter and pulley pusher, install water pump pulley (3).
10.
Install water pump pulley retaining screw (1). Tighten screw to 55 lb-ft (75 Nm).
3
1
11.
12.
13.
14.
15.
Start engine and check for operation and leaks (TM 10-3930-675-10).
16.
END OF WORK PACKAGE
0068 00-5/(0068 00-6 Blank)