TM 10-3930-675-24-2
INSTRUMENT PANEL SWITCHES, GAGES, AND PANEL LAMPS REPLACEMENT - CONTINUED
0073 00
ROTARY SWITCH INSTALLATION - CONTINUED
NOTE
3.
Connect instrument panel wiring harness connector(s) (14) to rear of switch (7).
4.
Push switch (7) upward through hole in switch plate (10) and install nut (12).
5.
Press knob (11) onto shaft of switch (7) and tighten setscrew (13).
6.
Install switch plate (10) on instrument panel (2) with three screws (6).
7.
Install instrument panel (2) with six washers (9) and screws (8).
6
2
7
10
8,9
8.
Install switch/gage panel (1) on instrument panel (2) with ten screws (3).
2
3
1
0073 00-5