TM 10-3930-675-24-2
TOPHANDLER PROXIMITY SWITCHES REPLACEMENT - CONTINUED
0075 00
SPREADER BEAM PROXIMITY SWITCH REMOVAL
1.
Remove two screws (15), washers (16), and proximity switch plate (20) from top of tophandler spreader beam (19).
2.
Measure position of proximity switch (17) in proximity switch plate (20), to ensure correct installation. Record mea-
surement.
3.
Remove two jamnuts (18) and proximity switch (17) from proximity switch plate (20).
17
15,16
18
19
20
4.
Loosen four screws (21) and remove cover (22) from junction box (23). Inspect rubber seal in groove of cover. Replace
seal only if damaged.
22
21
23
0075 00-6