TM 10-3930-675-24-2
TOPHANDLER JUNCTION BOX MAINTENANCE - CONTINUED
0077 00
RELAY REMOVAL
NOTE
All five relays are removed the same.
1.
Loosen six screws (1) and remove cover (2) from tophandler junction box (4). Three circuit breakers (5) should be in
ON position.
2.
Inspect rubber seal (3) on cover (2). Remove and discard seal only if damaged.
3.
Remove relay (11) from relay holder (12).
2
1
3
11
5
4
12
12
RELAY INSTALLATION
NOTE
All five relays are installed the same.
1.
Install relay (11) in relay holder (12).
2.
If removed, install new rubber seal (3) on cover (2).
3.
Install cover (2) on tophandler junction box (4) and tighten six screws (1).
END OF WORK PACKAGE
0077 00-3/(0077 00-4 Blank)