TM 10-3930-675-24-2
ELECTRONIC CONTROL UNITS (ECU) REPLACEMENT - CONTINUED
0080 00
HYDRAULIC SERVO SYSTEM ELECTRONIC CONTROL UNIT (ECU) REMOVAL
NOTE
Hydraulic servo system ECU is located in cab under driver's seat. Hydraulic servo system ECU is
identified as no. 790 on system electrical diagrams (WP 0048 00).
1.
Rotate three turnbuttons (15) and remove cover (17) from seat base (16).
15
16
17
2.
Slide electrical tray (22) outward from seat base (16).
NOTE
Perform step 3 for each of two connectors.
3.
Disconnect connector (19) from hydraulic servo system ECU (18) by sliding out red latch of connector.
4.
Remove four screws (20), washers (21), and hydraulic servo system ECU (18) from electrical tray (22).
16
18
22
19
20,21
0080 00-6