HYDRAULIC RESERVOIR AND LIFT CYLINDER SENSORS REPLACEMENT
THIS WORK PACKAGE COVERS
Temperature Sensor Replacement
Lift Cylinder Sensor Replacement
Pressure Sensor Replacement
Materials/Parts - Continued
Tools and Special Tools
Tool Kit, General Mechanic's (Item 128, WP 0289
Grease, Electrically Conductive (Item 21, WP 0290
Oil, Lubricating, OE/HDO 10 (Item 26, WP 0290
Master battery switch in OFF position
DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pres-
sure has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid
under pressure can penetrate the skin, causing serious injury.
Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If
an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically
removed within a few hours or gangrene may result.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings
after disconnecting. Contamination of hydraulic system could result in equipment failure.
Remove and discard tiedown straps.
Apply electrically conductive grease to connectors before connections are made.