TM 10-3930-675-24-2
TRANSMISSION OIL FILTER AND OIL COOLER HOSES AND FITTINGS REPLACEMENT -
CONTINUED
0115 00
TRANSMISSION-TO-OIL COOLER HOSES REMOVAL - CONTINUED
1.
Trace and tag hose (4) from transmission oil cooler upper unit (8) to transmission (1).
2.
Trace and tag hose (2) from transmission oil cooler lower unit (9) to transmission (1).
WARNING
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may
result in injury to personnel.
3.
Position suitable container to catch lubricating oil remaining in hoses (2 and 4).
4.
Remove four screws (5), flange (6), O-ring seal (7), and disconnect hose (4) from transmission oil cooler upper unit (8).
Discard O-ring seal.
5.
Disconnect opposite end of hose (4) from transmission adapter fitting (3). Remove hose.
6.
If damaged, remove adapter fitting (3) from transmission (1).
7.
Remove four screws (5), flange (6), O-ring seal (7), and disconnect hose (2) from transmission oil cooler lower unit (9).
Discard O-ring seal.
8.
Remove screw (10), washers (11), and hose clamp (12) securing hose (2).
9.
Disconnect opposite end of hose (2) from transmission adapter fitting (13). Remove hose.
10.
If damaged, remove adapter fitting (13) from transmission (1).
3
2
1
13
4
5,6,7
8
9
5,6,7
2
10,11,12
0115 00-2