TM 10-3930-675-24-2
TRANSMISSION ASSEMBLY HYDRAULIC HOSES AND PIPES REPLACEMENT - CONTINUED
0116 00
REMOVAL
1.
Refer to location diagram and find hydraulic hose or pipe to be removed.
5
4
3
2
6
1
12
7
11
10
9
8
TRANSMISSION ASSEMBLY HOSE
AND PIPE LOCATION DIAGRAM
2.
Remove and discard tiedown straps, as needed, to release hydraulic hose.
NOTE
Remove adapter fitting and O-ring seal only if damaged or leaking.
3.
Position suitable container to catch hydraulic oil retained in hose or pipe and disconnect hose or pipe from adapter fit-
ting.
4.
Remove fluid passage bolt, hose connection, and two O-ring seals from transmission. Discard O-rings.
5.
Loosen each of two fitting nuts and remove pipe (8, 9, 10, or 11) from transmission.
0116 00-2