TM 10-3930-675-24-2
TRANSMISSION OIL, OIL FILTERS, AND OIL FILTER HEAD REPLACEMENT - CONTINUED
0117 00
TRANSMISSION OIL FILTERS REMOVAL - CONTINUED
1.
Use a strap wrench to loosen oil filter (4).
2.
Unscrew oil filter (4) from oil filter head (3) by hand. Discard filter.
3.
Repeat steps 1 and 2 for second oil filter (4).
3
4
TRANSMISSION OIL FILTERS INSTALLATION
NOTE
Ensure oil filter head is clean and free of old oil.
1.
Apply a thin coat of lubricating oil to filter seal.
2.
Fill new oil filter (4) with clean lubricating oil.
CAUTION
DO NOT overtighten oil filter. Overtightening filter may cause damage to filter or filter head which
will result in oil leaks.
3.
Install oil filter (4) on oil filter head (3) and hand tighten.
4.
Use strap wrench to tighten oil filter (4) an additional to turn.
5.
Repeat steps 1 thru 4 for second oil filter (4).
6.
Start engine (TM 10-3930-675-10) and check for leaks.
7.
Check transmission oil level with engine idling in neutral and parking brake applied after engine reaches operating tem-
perature (TM 10-3920-675-10). Add oil as needed.
0117 00-3