TM 10-3930-675-24-2
BRAKE COOLING FILTER AND FILTER HEAD REPLACEMENT - CONTINUED
0128 00
BRAKE COOLING FILTER HEAD INSTALLATION
NOTE
Refer to General Maintenance Instructions (WP 0284 00) for complete instructions on connecting
hydraulic hoses and applying proper torque.
1.
If mounting bracket (10) was removed, install bracket on vehicle with two washers (9) and screws (8).
2.
Position filter head (3) on mounting bracket (10) and secure with two washers (7) and screws (6).
3.
Apply pipe sealant to threads of two adapter fittings (5) and install in filter head (3).
4.
Connect two hydraulic hoses (4) to filter head (3).
8,9
6,7
10
5
5
4
4
3
Install new brake cooling filter (refer to Brake Cooling Filter Installation).
5.
6.
7.
Start engine (TM 10-3930-675-10) and check for hydraulic oil leaks.
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
END OF WORK PACKAGE
0128 00-4