CAB TRANSPORT LIFT MAINTENANCE - CONTINUED
CAB TRANSPORT LIFT REMOVAL
Use extreme caution when handling heavy parts. Provide adequate support and use assistance
during procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this warning
may result in death or injury to personnel.
Lifting device must have a 2,000-lb (908-kg) capacity to lift cab transport lift. Failure to follow
this warning may result in death or injury to personnel.
Raise cab transport lift (44) approximately 6 in. (15 cm) to gain clearance to attach nylon sling (TM 10-3930-675-10).
Attach nylon sling to cab transport lift (44) and suitable lifting device. Take up slack in nylon sling.
Perform step 3 at top of each of two cab lifting cylinders.
Pry spring clip (45) away from cab lifting cylinder (46) and remove spring clip to disconnect cylinder from cab transport
With assistance, use lifting device to remove cab transport lift (44) from vehicle.