TM 10-3930-675-24-2
BOOM ASSEMBLY WEAR PLATES REPLACEMENT - CONTINUED
0146 00
STYLE A WEAR PLATE REMOVAL - CONTINUED
NOTE
Ensure spacers are tagged or marked for location. Spacers must be reinstalled in same location to
maintain boom spacing.
4.
Remove spacers (4) and wear plate (5).
4
5
5.
Measure wear plate thickness. Measurement must be a minimum of 1 in. (25.4 cm). If wear plate is not as specified,
replace wear plate.
STYLE A WEAR PLATE INSTALLATION
1.
Install wear plate (5) and spacers (4) as noted in removal.
4
5
0146 00-4