TM 10-3930-675-24-2
DATA PLATE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools - Continued
Maintenance Level
Organizational
Tools and Special Tools
Tool Kit, General Mechanic's (Item 128, WP 0289
Materials/Parts
Rivets (as required)
REMOVAL
WARNING
Wear eye protection when drilling out rivets. Failure to do so could result in serious eye injury.
CAUTION
Avoid using a twist drill with an excessively large diameter when drilling out rivets. Failure to follow
this caution could result in enlarged holes in vehicle, too large for rivet size needed.
1.
Drill out four rivets (1) from data plate (2). Discard rivets.
2.
Remove data plate (2) from vehicle.
2
1
INSTALLATION
1.
Position data plate (2) over existing holes in vehicle.
2.
Install data plate (2) on vehicle with four new rivets (1).
END OF WORK PACKAGE