TOPHANDLER HYDRAULIC SLEWING MOTORS REPLACEMENT
THIS WORK PACKAGE COVERS
Materials/Parts - Continued
O-ring (P/N 923828.0797) (2)
Tools and Special Tools
Tool Kit, General Mechanic's (Item 128, WP 0289
Oil, Lubricating, GO 85W/140 (Item 25, WP 0290
Oil, Lubricating, OE/HDO 10 (Item 26, WP 0290
Boom and tophandler lowered for access (TM 10-
DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pres-
sure has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid
under pressure can penetrate the skin, causing serious injury.
Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If
an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically
removed within a few hours or gangrene may result.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting
any hydraulic lines. Failure to do so could result in injury.
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings
after disconnecting. Contamination of hydraulic system could result in equipment failure.
Tag all hydraulic lines.