TM 10-3930-675-24-2
TOPHANDLER HYDRAULIC SLEWING MOTORS REPLACEMENT - CONTINUED
0166 00
INSTALLATION - CONTINUED
6.
Position protective cover (2) on turning plate (1) with ten screws (3).
1
2
3
7.
If a new slewing motor was installed, lubricate motor in accordance with WP 0051 00.
8.
9.
Operate tophandler (TM 10-3930-675-10) and check for leaks.
NOTE
Replace hydraulic reservoir return filters after 100 hours of operation (WP 0185 00).
END OF WORK PACKAGE
0166 00-7/(0166 00-8 Blank)